I had a ute and put a canopy on it, cost $2000. Roof racks cost me $750 for it, and when I sold the vehicle with low mileage, in spotless condition, got not a cent extra for them.
Never again.
-- Edited by jetj on Wednesday 29th of August 2012 05:39:21 PM
gt1234 said
07:48 PM Aug 29, 2012
gday guys and gals i would love to get some feed back on the different pros and cons on roof loaders we have a hilux with no canopy as yet wanted to get some direction first have looked at rear and side loaders on the internet but have not seen anything in the flesh being from down south not many carry them this way to have a look at also have seen a oboard motor mount to load the ob in the ute loading it from vertical to horizontal the tinny would be approx 3.5 to 3.7 mt the ob 15 to 20 many thanks and regards
Duh said
08:03 PM Aug 29, 2012
I think Dunco did something like this awhile back so may be full bottle on it, or a couple of our resident fishermen here so hope you get some help on the matter.
ozi2 said
09:08 PM Aug 29, 2012
gt1234 wrote:
gday guys and gals i would love to get some feed back on the different pros and cons on roof loaders we have a hilux with no canopy as yet wanted to get some direction first have looked at rear and side loaders on the internet but have not seen anything in the flesh being from down south not many carry them this way to have a look at also have seen a oboard motor mount to load the ob in the ute loading it from vertical to horizontal the tinny would be approx 3.5 to 3.7 mt the ob 15 to 20 many thanks and regards
G'day GT, during your research you will have to consider what the different canopy manufacturers offer in load rating if you choose the canopy option with whatever roof loading system you decide on. On my last ute I had the ARB heavy duty canopy with a load rating of 150kg. ( but at well over $3000.00 + not cheap) I think the cost of canopies are hard to justify as any perceived security with a canopy is just an illusion.
Happy hunting,
cheers
ozi2
justcruisin01 said
10:59 PM Aug 29, 2012
gt1234 wrote:
gday guys and gals i would love to get some feed back on the different pros and cons on roof loaders we have a hilux with no canopy as yet wanted to get some direction first have looked at rear and side loaders on the internet but have not seen anything in the flesh being from down south not many carry them this way to have a look at also have seen a oboard motor mount to load the ob in the ute loading it from vertical to horizontal the tinny would be approx 3.5 to 3.7 mt the ob 15 to 20 many thanks and regards
The fibreglass made canopies are very expensive & I would not fit these if you wish to carry a boat as you have to fit internal supports so more expensive.
I would desighn & build a frame to the size & shape you wish with the strength to carry your boat, then have it clad in alloy with openings either side, seal the rear from dust . From this point its very easy to set up a side loader.
I saw a home made unit like this last year on the road that was so simple, bit hard to explain it to you on here but half of the slide rails became the rails the boat remained on. The two remaining halves folded beside each other. It used the normal side loader winch.
This way you end up with a very strong load sharing canopy at a budget cost.
JC.
bill12 said
01:10 AM Aug 30, 2012
I made my own and just had to learn the best technique to load the tinnie .A couple of boat rollers weld in brackets on the back, and give it a good push. You have to use ratchet ties downs these days , but I prefer 12mm silver rope. I have carried a tinnie to some of the most remote parts of OZ, and haven,t lost it yet.If you want , I will draw a diagram.Bill
gt1234 said
11:22 PM Aug 30, 2012
many thanks everyone for replying if its not to much trouble bill i would like to get a sketch again thanks and we hope to meet you guys on the track one day regards
I had a ute and put a canopy on it, cost $2000. Roof racks cost me $750 for it, and when I sold the vehicle with low mileage, in spotless condition, got not a cent extra for them.
Never again.
-- Edited by jetj on Wednesday 29th of August 2012 05:39:21 PM
gday guys and gals i would love to get some feed back on the different pros and cons on roof loaders we have a hilux with no canopy as yet wanted to get some direction first have looked at rear and side loaders on the internet but have not seen anything in the flesh being from down south not many carry them this way to have a look at also have seen a oboard motor mount to load the ob in the ute loading it from vertical to horizontal the tinny would be approx 3.5 to 3.7 mt the ob 15 to 20 many thanks and regards
I think Dunco did something like this awhile back so may be full bottle on it, or a couple of our resident fishermen here so hope you get some help on the matter.
G'day GT, during your research you will have to consider what the different canopy manufacturers offer in load rating if you choose the canopy option with whatever roof loading system you decide on. On my last ute I had the ARB heavy duty canopy with a load rating of 150kg. ( but at well over $3000.00 + not cheap) I think the cost of canopies are hard to justify as any perceived security with a canopy is just an illusion.
Happy hunting,
cheers
ozi2
The fibreglass made canopies are very expensive & I would not fit these if you wish to carry a boat as you have to fit internal supports so more expensive.
I would desighn & build a frame to the size & shape you wish with the strength to carry your boat, then have it clad in alloy with openings either side, seal the rear from dust . From this point its very easy to set up a side loader.
I saw a home made unit like this last year on the road that was so simple, bit hard to explain it to you on here but half of the slide rails became the rails the boat remained on. The two remaining halves folded beside each other. It used the normal side loader winch.
This way you end up with a very strong load sharing canopy at a budget cost.
JC.