I am looking for a thread on GN about converting US motor homes to Aussie specs, I have done some searches and still cannot find it, one of our members has had this done and I can't find the topic, anybody know where it is?
Dougwe said
04:47 AM Jun 3, 2013
Howdy Bigw, just a thought mate, maybe you could check out a sewing shop for thread but how will you fit a motor home down your hole mate.
jetj said
05:10 AM Jun 3, 2013
I think this might be what you're after Wombat, in the Shoe Your Rig Section.
site has some info re the importation of US vehicles.
-- Edited by Yuglamron on Monday 3rd of June 2013 10:18:06 AM
Dougwe said
01:55 PM Jun 3, 2013
Good on ya Sheba, you always help out with links, you might have to rescue me one day as I haven't put a link in yet.
Sorry to go of your topic a little there Bigw.
_wombat_ said
03:43 PM Jun 3, 2013
Thanks guys, I did look in the show your rig section, must have missed it
Dougwe, I would dig a bigger hole, well I would get Mrs w to do it. why would I need a sewing shop? I think the sun is getting to you up there in Townsville.
Thanks for the link Sheba
In regards to links, some browsers do it automatically (Chrome does) but if that does not work just copy and paste the web address into your topic and then put [ u r l ] at the start of the address and [ / u r l ] and this at the end, but do not put any spaces in between. give it a go.
Gerty Dancer said
03:53 PM Jun 3, 2013
Wombat I use IE, and I've had success after many tries and failures, by clicking on Reply instead of Quick reply, then copy and paste, but MUST click on the space bar at the end. Works for me.
Dougwe said
04:00 PM Jun 3, 2013
_wombat_ wrote:
Thanks guys, I did look in the show your rig section, must have missed it
Dougwe, I would dig a bigger hole, well I would get Mrs w to do it. why would I need a sewing shop? I think the sun is getting to you up there in Townsville.
Thanks for the link Sheba
In regards to links, some browsers do it automatically (Chrome does) but if that does not work just copy and paste the web address into your topic and then put [ u r l ] at the start of the address and [ / u r l ] and this at the end, but do not put any spaces in between. give it a go.
You said in your request for info you were looking for thread, silly. I forgive you though cos you haven't been well.
How goes it anyway mate?
_wombat_ said
04:10 PM Jun 3, 2013
GD, if it works for you then keep doing it that way, there is always another way to do things with computers
Dougwe, thread is the same as topic (I think, then again sometimes I don't think)
Still have some more hospital visits to do this week but I am getting there, how's it going up north?
_wombat_ said
06:04 PM Jun 3, 2013
Yuglamron wrote:
May I suggest you research Collyn Rivers articles on just this subject. Converting USA RV's to Aussie specs.
Very interesting reading and points out some very important info re legal aspects.
site has some info re the importation of US vehicles.
-- Edited by Yuglamron on Monday 3rd of June 2013 10:18:06 AM
Thanks, going to have a look now
Sheba said
08:03 PM Jun 3, 2013
Gerty Dancer wrote:
Wombat I use IE, and I've had success after many tries and failures, by clicking on Reply instead of Quick reply, then copy and paste, but MUST click on the space bar at the end. Works for me.
I do that too Gerty, except for me, it's the Enter button that works. With some, I have to delete the last letter, then re-type it, and hit the Enter button straight away. [NO SPACE]. It doesn't work [ for me,] if you put a space after the last letter and then hit Enter.
Have never used Quick Reply.
Cheers,
Sheba.
-- Edited by Sheba on Monday 3rd of June 2013 08:09:42 PM
neilnruth said
05:39 AM Jun 4, 2013
I use quick reply most of the time - maybe that's why I have trouble making links work. Thanks GD and Sheba.
Willow said
05:48 AM Jun 4, 2013
I use quick reply because I don't know of any other type of reply. Haven't had a link work yet.
jetj said
12:31 PM Jun 4, 2013
The only way I do it is click reply, add the URL and highlight it then click the linkied chain above the box and copy/paste the URL again in the pop-up box and click the left button. A pain but it works for me.
-- Edited by jetj on Tuesday 4th of June 2013 12:36:44 PM
I am looking for a thread on GN about converting US motor homes to Aussie specs, I have done some searches and still cannot find it, one of our members has had this done and I can't find the topic, anybody know where it is?
I think this might be what you're after Wombat, in the Shoe Your Rig Section.
http://thegreynomads.activeboard.com/t51323303/conversion-work/
http://thegreynomads.activeboard.com/t51323303/conversion-work/
May I suggest you research Collyn Rivers articles on just this subject. Converting USA RV's to Aussie specs.
Very interesting reading and points out some very important info re legal aspects.
The http://www.RVMAA.com.au
site has some info re the importation of US vehicles.
-- Edited by Yuglamron on Monday 3rd of June 2013 10:18:06 AM
Sorry to go of your topic a little there Bigw.
Thanks guys, I did look in the show your rig section, must have missed it
Dougwe, I would dig a bigger hole, well I would get Mrs w to do it.
why would I need a sewing shop? I think the sun is getting to you up there in Townsville.
Thanks for the link Sheba
In regards to links, some browsers do it automatically (Chrome does) but if that does not work just copy and paste the web address into your topic and then put [ u r l ] at the start of the address and [ / u r l ] and this at the end, but do not put any spaces in between. give it a go.
You said in your request for info you were looking for thread, silly. I forgive you though cos you haven't been well.
How goes it anyway mate?
GD, if it works for you then keep doing it that way, there is always another way to do things with computers
Dougwe, thread is the same as topic (I think, then again sometimes I don't think)
Still have some more hospital visits to do this week but I am getting there, how's it going up north?
Thanks, going to have a look now
-- Edited by Sheba on Monday 3rd of June 2013 08:09:42 PM
The only way I do it is click reply, add the URL and highlight it then click the linkied chain above the box and copy/paste the URL again in the pop-up box and click the left button. A pain but it works for me.
-- Edited by jetj on Tuesday 4th of June 2013 12:36:44 PM