Exterior door bowl protector -https://www.ebay.com.au/i/301995759274?chn=ps
Craig1 said
10:10 AM Sep 12, 2018
Has any one used this type of protection please? If so brand/seller and durability etc. I have one door handle area that seems very thin on paint and appears scratched easily. I don't want to use the clear vinyl type. cheers and thanks Craig
2foot6 said
05:09 PM Sep 12, 2018
I had four of those type of protectors on my car,took them off after getting a finger nail caught between the protector and the door skin,yes it b...dy hurt.
Craig1 said
08:13 PM Sep 12, 2018
Thanks Pete ( 750mm ?) Just what i was looking for, as i must be hitting the panel behind the handle to mark the paint.
rodrocket said
01:55 PM Sep 13, 2018
I know you said you didn't want the clear vinyl tape but good quality tape is better than that junk
If you want to try some tape I have what they use on the leading edge of a Boeing wing here somewhere, send me a PM & I will gladly send you some to try, you will just need to trim it to shape.
Just remember to use a hair dryer or let it sit in the sun to go soft so you can stretch it into shape
Craig1 said
03:58 PM Sep 13, 2018
Sent you pm Rod and had read the ebay tape instructions
Has any one used this type of protection please? If so brand/seller and durability etc. I have one door handle area that seems very thin on paint and appears scratched easily. I don't want to use the clear vinyl type. cheers and thanks Craig
I had four of those type of protectors on my car,took them off after getting a finger nail caught between the protector and the door skin,yes it b...dy hurt.
If you want to try some tape I have what they use on the leading edge of a Boeing wing here somewhere, send me a PM & I will gladly send you some to try, you will just need to trim it to shape.
Just remember to use a hair dryer or let it sit in the sun to go soft so you can stretch it into shape