I have isuzu DMax 2013 model Auto and want to remove the console for cleaning purposes and install wire to rear of vehicle cabin.
I have searched everywhere for advice but no luck so far.
-- Edited by dickyknee on Tuesday 3rd of November 2020 06:13:06 AM
Whenarewethere said
07:08 AM Nov 3, 2020
Have you tried 'isuzu d'max workshop manual' or words to that effect.
Warren-Pat_01 said
08:01 AM Nov 3, 2020
Can I as a D-max owner point you to the IsuzuOz Forum?
Like this one, it is informative, helpful but vehicle specific. There is a General Isuzu section, as well as D-max, MUX sections.
Your question may have already been covered so you might find it with a search. If not, ask & you will receive, I'm certain.
One annoying point is that the forum times out after 60 miniutes; you can log back in for longer periods.
dickyknee said
08:27 AM Nov 3, 2020
Thank you guys for your help, I will try what you suggest
dickyknee said
08:30 AM Nov 3, 2020
Yes, I even contacted Isuzu and they said take it to a dealer. Like bloody hell!
I will never set foot in the Isuzu dealership in Cairns, Trinity Auto Group. Bastards!!
Terrible service and abusive Workshop Manager.
I will drive to Townsville, 350 km for my next Isuzu.
dickyknee said
08:31 AM Nov 3, 2020
Thanks mate, on my way there now.
dickyknee said
11:35 AM Nov 3, 2020
Mate,
I can't find the General Isuzu section you mentioned. Can you link it please
Whenarewethere said
11:43 AM Nov 3, 2020
I have removed every panel on my car, more than once! You may need some trim panel clips, as you may loose or break some.
"install wire to rear of vehicle cabin.", I guess you have considered alternatives, for instance running the wire behind the drivers, and right rear passengers door sill trim, may save a lot of work.
Whenarewethere said
12:25 PM Nov 3, 2020
The main harness in my car runs along the passenger sill. This is easy to access. Pull off the door seals. You may need to pull off the B column trim panel etc. The panels just need a short sharp firm tug.
I have isuzu DMax 2013 model Auto and want to remove the console for cleaning purposes and install wire to rear of vehicle cabin.
I have searched everywhere for advice but no luck so far.
-- Edited by dickyknee on Tuesday 3rd of November 2020 06:13:06 AM
Have you tried 'isuzu d'max workshop manual' or words to that effect.
Like this one, it is informative, helpful but vehicle specific. There is a General Isuzu section, as well as D-max, MUX sections.
Your question may have already been covered so you might find it with a search. If not, ask & you will receive, I'm certain.
One annoying point is that the forum times out after 60 miniutes; you can log back in for longer periods.
Yes, I even contacted Isuzu and they said take it to a dealer. Like bloody hell!
I will never set foot in the Isuzu dealership in Cairns, Trinity Auto Group. Bastards!!
Terrible service and abusive Workshop Manager.
I will drive to Townsville, 350 km for my next Isuzu.
Thanks mate, on my way there now.
Mate,
I can't find the General Isuzu section you mentioned. Can you link it please
I have removed every panel on my car, more than once! You may need some trim panel clips, as you may loose or break some.
https://thegreynomads.activeboard.com/t65443581/car-acoustic-insulation/
The main harness in my car runs along the passenger sill. This is easy to access. Pull off the door seals. You may need to pull off the B column trim panel etc. The panels just need a short sharp firm tug.