Hi all. Is there an electronic gas level indicator on the market that actually works ? I have tried one plus the magnetic ones and the inline one. Either don't work at all or not very accurate. Col P
I was thinking about fitting a gasfuse. They sell for around $42. They have a pressure gauge that shows when full, empty. My feeling is the guage would do exatly that, show when empty (nothing inbetween). My belief is the pressure inside the cylinder is pretty constant until all gone. Is my thinking correct??
I have used the old pouring hot water on the cylinder in the past, always worked for me. Trouble is my current van, the bottles are in the boot.
Cheers Pete
LPG bottles. Kettle is fine but I have 4 bottles. Shower, BBQ plus 2 on the A bar. If "the boss" runs out of hot water while in the shower I am in trouble. Electronic reader that works plus a pencil would be great. Col P
I rely on the old, hot water and look for the condensation mark, (I use a rag to soak up the water, as my bottles are in a hatch)
I have the gas fuse type device on my old caravan, I can confirm that as a gas level gauge, they are hopeless, as they show pressure until there is no gas left
I also carry a (recent new toy) weight scale In a normal situation, I would remove the near empty bottle and swish it around, to see how much was in, now I shall weigh it
Edit to say that (I thought that I had one, but probably lost it, before I could use it)
While looking in my motorhome (for something else) I have come across a battery operated gas level, similar to the link above I had posted As all my gas bottles in the motorhome, old caravan, and house BBQ are all full I shall (if I remember), test this toy in the field, on my next trip, starting next week I shall advise of my finding in a few months when I return home
-- Edited by Tony Bev on Tuesday 20th of December 2016 07:44:55 PM
I use the gas fuse it always gives a pretty good indication in the cool of the mornings, but I have dual 9Kg bottles on the draw bar so an indication is all I really need. When empty switch over to the next one and fill the first.
__________________
Possum; AKA:- Ali El-Aziz Mohamed Gundawiathan
Sent from my imperial66 typewriter using carrier pigeon, message sticks and smoke signals.
This certainly looks like the ants pants of gas level toys
Every self respecting young boy, (like me), would want one
Unfortunately the website in the link, does not accommodate Australia
Where did you get it from please, FraLyn
http://www.levelcheck.com/au/ & here for an article about it : http://www.rvdaily.com.au/issue008/#225
Thanks for that link Bill, it is appreciated
As I will shortly be away from home base for a while, I shall look into this when I return, unless I find that my battery operated one, is satisfactory for my needs The old hot water condensation trick, is a bit cumbersome, when the LPG bottles are in a hatch, but still much safer (for me), than having the bottle run out, while the wife is in the shower
My son bought it for me here in Australia, cost about $90 a few years ago. Link below shows where you may purchase one from. Handy device for checking levels in a gas bottle.
My son bought it for me here in Australia, cost about $90 a few years ago. Link below shows where you may purchase one from. Handy device for checking levels in a gas bottle.
I was speaking with the gas tanker driver who fills my tank at home and he suggests the most accurate way of gauging the level of gas on the bottle is to pour boiling water over the bottle when the bottle is actually in use. Seems to work.
Gas fuses were $20 at Aldi a few weeks ago. You get a false reading as the temperature goes up. Eg hot days. Checking in the morning it should be reasonably accurate.
I don't know whether they are still available but there used to be replacement taps for cylinders that that a float gauge built into them. When you purchased one you got a gas fitter to swap the valves over.
__________________
PeterD Nissan Navara D23 diesel auto, Spaceland pop-top Retired radio and electronics technician. NSW Central Coast.
I was thinking about fitting a gasfuse. They sell for around $42. They have a pressure gauge that shows when full, empty. My feeling is the guage would do exatly that, show when empty (nothing inbetween). My belief is the pressure inside the cylinder is pretty constant until all gone. Is my thinking correct?? I have used the old pouring hot water on the cylinder in the past, always worked for me. Trouble is my current van, the bottles are in the boot. Cheers Pete
Gasfuse is pretty much useless as the pressure in the cylinder does not change appreciably while there is ANY liquid in the bottom of said cylinder. The boiling point of LPG is -42 degrees C so at normal temperature there is always pretty much the same pressure.
__________________
If there are no dogs in Heaven, then when I die I want to go where they went.
My girls are Misha, Maddy, Morgan and Muffin. RIP Jen, my princess.
RIP Molly, our dear girl who crossed the Rainbow Bridge 24/10/2016. A loyal and faithful companion.
Purchased a scale type from Anaconda about $40, it is battery operated (for the display) and is tared for a 9 KG bottle.
Just loosen the clamps on your bottle and lift it with the scale, reading are very accurate as long as the bottle clamp is not tight and there is no load on your takeoff line to your switching valve. (mine is a flexible line so no issue) Nice to know how much gas is left in remote areas when you are not sure when you can refill, at times I have filled a 1/4 full bottle knowing it will be a while before I can refill again.
__________________
Brian & Nada retired and > "Ready to live the Dream" Live in the Shire!
76 series V8 Landcrab with Jayco Starcraft Outback Poptop
Friend of mine who uses the 9KG bottles to run a flame gum for bitumen work simply cracks the tap open a bit and tips the bottle over till liquid gas flows out then tightens the tap. Reckons this is no more dangerous than the method of filling the bottles.
I was thinking about fitting a gasfuse. They sell for around $42. They have a pressure gauge that shows when full, empty. My feeling is the guage would do exatly that, show when empty (nothing inbetween). My belief is the pressure inside the cylinder is pretty constant until all gone. Is my thinking correct?? I have used the old pouring hot water on the cylinder in the past, always worked for me. Trouble is my current van, the bottles are in the boot. Cheers Pete
Gasfuse is pretty much useless as the pressure in the cylinder does not change appreciably while there is ANY liquid in the bottom of said cylinder. The boiling point of LPG is -42 degrees C so at normal temperature there is always pretty much the same pressure.