check out the new remote control Jockey Wheel SmartBar Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: house solar pannels on my ute


Veteran Member

Status: Offline
Posts: 33
Date:
house solar pannels on my ute


question can i put a house solar panel on my ute i just had 24 panels fitted to my house and there was one spare so i want to put it on my ute when we do the big lap next year .i was told by a mate that the house panel may put out to much power and fry my batteries .

panel specs are :model type :gcl-p6/60265

265w (0~+5w)

vmp31.0v

imp8.55a

voc38.1v

isc 9.20a

max rectified current 10 a

fuse 15a

any imfo please cheers griffo

 



__________________
www.showcaseyourmusic.com/stillworkin


Guru

Status: Offline
Posts: 7642
Date:

Yep as long as voltage reg is within voltage range of panel . Panel mounted correctly .

__________________
Whats out there


Guru

Status: Offline
Posts: 3066
Date:

I thought house panels were 24v.
Hence the 31\38.1 v on label?.

My 200w says Open 22v Max 18v.

__________________


Guru

Status: Offline
Posts: 7642
Date:

Use the correct reg . Some 12v panels are wired in series also . Helps wire size, voltage drop .www.australiandirect.com.au/shop/power-electrical/solar-power/solar-panel-regulators/120301

__________________
Whats out there


Guru

Status: Offline
Posts: 1947
Date:

Hi griffo smile

I would say two things about that panel.

1 if you want to get the full benefit out of its 265Watts then you will need to use a quality MPPT regulator. If you use a simple regulator or a cheap fake MPPT regulator you will only get half the power and will probably think the panel is crap. Yes really you will only get about 120 Watts maximum.furious Ask about a proper MPPT regulator if you need more information but you will need a 20Amp model minimum, not  the 10 Amp one, on that link from Aus Kiwi.

2 That is a very big panel for mobile use and will be in real danger of cracking the glass. The middle of the back side should be also supported to help prevent the glass from cracking IMHO. If you put some soft support underneath as well as the side supports it should be OK most likely.  hmm

Of course you must use a regulator of some sort with any panel to regulate the charging of the battery or you will fry all your batteries.

Jaahn



-- Edited by Jaahn on Saturday 17th of June 2017 02:47:11 PM

__________________


Guru

Status: Offline
Posts: 7642
Date:

The one in link is not recommended for this particular unit . If you asked and saw the whole series it mentions this . Sheesh !it lists up to 40 amp . 



-- Edited by Aus-Kiwi on Saturday 17th of June 2017 04:47:17 PM

__________________
Whats out there


Guru

Status: Offline
Posts: 1947
Date:

Aus-Kiwi wrote:

Use the correct reg . Some 12v panels are wired in series also . Helps wire size, voltage drop .www.australiandirect.com.au/shop/power-electrical/solar-power/solar-panel-regulators/120301

The one in link is not recommended for this particular unit . If you asked and saw the whole series it mentions this . Sheesh !it lists up to 40 amp .


 Hi Aus-Kiwi smile

The second reg there is OK, the 2210A  model with 20A charge rating. It just scrapes in above the wattage by 2%  but if the panel is flat mounted that will not be a problem. and they limit anyway. The max voltage allowed is high at 92-100V which is more important for longevity. Note that panel is only good for a 12V battery. It will disappoint charging a 24V battery under some conditions.

The Tracer MPPT units work OK in my experience. Probably the best price units which do work properly as MPPT. They can also be bought from other suppliers including ebay at good prices.

Jaahn

 

 Model


Tracer2210A



Nominal system voltage

12/24VDC auto work

Rated charge current

 

20A

 

 

Rated discharge current

 

20A

 

Battery input voltage

range

8~32V

Max. PV open circuit

voltage

100V(at minimum operating environment temperature)

                               92V(at 25 environment temperature)

 MPP voltage range

VBAT+2V 72V

Max. PV input power

 

260W(12V)



-- Edited by Jaahn on Saturday 17th of June 2017 09:06:30 PM

__________________


Veteran Member

Status: Offline
Posts: 33
Date:

thanks guys ill make sure i get the right mppt and mount it on something flexible cheers griffo


__________________
www.showcaseyourmusic.com/stillworkin


Veteran Member

Status: Offline
Posts: 33
Date:

i have a 15amp solar controller do you think that would work ? it reads 12v/24v 15amp

__________________
www.showcaseyourmusic.com/stillworkin


Guru

Status: Offline
Posts: 1947
Date:

griffo and kezz wrote:

i have a 15amp solar controller do you think that would work ? it reads 12v/24v 15amp


Hi smile

Do you want to know if it will work ? or if it will work properly and get the full output of the panel ?

If the solar controller/regulator is a normal PWM type it will work BUT you will get only ~ 9 Amps so at ~14V that is only 126 Watts maximum. Is that what you want.hmm

If it is MPPT then the 15A rating will not be enough for charging a 12V battery from that panel. As I said it will need to be rated at 20A.  If the controller does not self regulate on current, then it will probably burn out sooner rather than later!!furious This will put the battery at risk !

Jaahn 



-- Edited by Jaahn on Sunday 18th of June 2017 07:55:09 PM

__________________


Veteran Member

Status: Offline
Posts: 33
Date:

thanks jaahn ill get the right one cheers griffo

__________________
www.showcaseyourmusic.com/stillworkin
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook