check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Storing unused Silicone - Fridge or Freezer?


Guru

Status: Offline
Posts: 888
Date:
Storing unused Silicone - Fridge or Freezer?


I just opened a new tube of Silicone and used a very small amount.   So, Im asking for suggestions for storing the unused portion so that it remains usable for the longest time.   I have heard conflicting advice on storing the remains of the tube in either the fridge or the Freezer.   Anyone with experience want to make a comment?



__________________

Iza

Semi-permanent state of being Recreationally Outraged as a defence against boredom during lockdown.



Senior Member

Status: Offline
Posts: 469
Date:

smileNever heard of the fridge or freezer trick but what I do is I unscrew the nozzle and right away I take a disposable glove using it double layered I place it over the tube and then screw the nozzle back on. I do use a kebab stick to remove a good portion of the silicone from the nozzle so that when it dries it is easy to remove the remainder.

I suppose I could have cut a portion of the glove off and and used it on others but have a heap of gloves smile.



-- Edited by TimTim on Monday 30th of January 2023 08:40:49 PM

Attachments
__________________


Guru

Status: Offline
Posts: 542
Date:

Hi I am a qualified painter but that means nothing but I did learn on my travels in this beautiful country when I worked in a caravan park with some plumbers and they said put a flathead nail in the end of the tube and just put in the fridge also works with no more gaps as well Cheers

__________________

John

2017 dmax lovells upgrade full CSM trade  aluminium canopy,3.5 m quintrex tinny and rear boat loader mangrove jack aluminium trailer

JB scorpion sting 206



Guru

Status: Offline
Posts: 1392
Date:

With silicone just remove nozzle & then screw it back on with some plastic over the thread. eg a piece of plastic shopping bag.

Even just leaving the nozzle in place & letting the nozzle contents go off will protect the tube's content for quite a long time

With Sikaflex (eg. 11FC) keeping the tube similarly sealed & kept in the fridge helps to keep it longer. - a few weeks.

__________________

A Nomadic Life (Current)    

The Big Trip (2008/9)     



Guru

Status: Offline
Posts: 1316
Date:

TimTim wrote:

smileNever heard of the fridge or freezer trick but what I do is I unscrew the nozzle and right away I take a disposable glove using it double layered I place it over the tube and then screw the nozzle back on. I do use a kebab stick to remove a good portion of the silicone from the nozzle so that when it dries it is easy to remove the remainder.

I suppose I could have cut a portion of the glove off and and used it on others but have a heap of gloves smile.



-- Edited by TimTim on Monday 30th of January 2023 08:40:49 PM


I do basically the same but with a piece of cling wrap. works fine no need to put it in the fridge.
Landy

__________________
In life it is important to know when to stop arguing with people and simply let them be wrong.


Guru

Status: Offline
Posts: 7314
Date:

Firstly a technical point on highrise buildings flush glazing. The glass is bonded in with silicone & left to cure for a month in the factory in a sub frame & not moved. The silicone cures about 1mm per 24 hours, there is about a 30mm bonding thickness around the edge of the glass. The air cures the silicone. (3 decades ago I did a University short course on building glazing)

 

You have to seal the silicone as thoroughly as possible & with multiple barriers to stop air leaking in in any small amount so the tube of silicone lasts longer.



__________________

Procrastination, mankind's greatest labour saving device!

50L custom fuel rack 6x20W 100/20mppt 4x26Ah gel 28L super insulated fridge TPMS 3 ARB compressors heatsink fan cooled 4L tank aftercooler Air/water OCD cleaning 4 stage car acoustic insulation.



Senior Member

Status: Offline
Posts: 345
Date:

Glad wrap or plastic and screw the cap back on.

When in the Big Green Shed grab a handful of new uncut nozzles from the paint dept and use one of them. Usually half a dozen nozzles will be enough for the average size tube of silicon sealant,
I always grab a handful of them each time I buy a cartridge tube.

__________________

Don't sell the Sun to buy the Candle



Guru

Status: Offline
Posts: 1306
Date:

I have done both, fridge and freezer. Found depending on the brand is directly proportional to
the success. Some like the fridge, some are better in the freezer. Freezer is always my preferred
option, however time consideration is required if in the freezer. Does not come out of the
cartridge very well if frozen.
Also store Liquid Nails in the freezer.
Super glue also goes well in the freezer. Was taught that trick by a glazier.

__________________

Ex software engineer, now chef



Chief one feather

Status: Offline
Posts: 17325
Date:

I have kept used tubes of Silicone or similar in the fridge for years successfully. I have just checked 2 tubes of Sikaflex that are in the fridge, 1 black and 1 white and both still OK after about 12 months approx. Depending on the next job, I need one for next, I will check but more than likely chuck out and get new onesconfuse

I can't remember where or exactly when I was told about the trick now but more than likely when I was still chasing young squaws around the camp.



__________________

Live Life On Your Terms

DOUG  Chief One Feather  (Losing feathers with age)

TUG.......2014 Holden LT Colorado Twin Cab Ute with Canopy

DEN....... 2014 "Chief" Arrow CV  (with some changes)

 



Guru

Status: Offline
Posts: 1129
Date:

Another one, keep your tubes of super glue in the freezer.

__________________


Veteran Member

Status: Offline
Posts: 97
Date:

You can buy the small 150 g tubes from the green shed for around $5, then when it goes off after a few weeks it doesn't really matter, I keep an unopened one in my toolkit just in case . Ian

__________________


Guru

Status: Offline
Posts: 888
Date:

Useful replies, thanks.   Gunna go the fridge route.   Lots of small jobs coming up so want the material to be usable straight from storage.



__________________

Iza

Semi-permanent state of being Recreationally Outraged as a defence against boredom during lockdown.



Chief one feather

Status: Offline
Posts: 17325
Date:

Before you use from fridge, just squirt a little out of tube into a bit of paper towel or similar as the first little bit will be very thin/watery.

__________________

Live Life On Your Terms

DOUG  Chief One Feather  (Losing feathers with age)

TUG.......2014 Holden LT Colorado Twin Cab Ute with Canopy

DEN....... 2014 "Chief" Arrow CV  (with some changes)

 



Veteran Member

Status: Offline
Posts: 49
Date:

I was a tech rep for a major sealant/adhesive manufacturer in Australia for several years.

My recommendation is to store all acetic or moisture cure sealant/adhesive in the fridge for a longer life and storage.

As all sealants/adhesives cure from exposure to the atmosphere by chemical fusion or drawing on ambient moisture for curing.

The sealant will only cure or harden from the end of the nozzle towards the cartridge or tube.

In theory, if the sealant cures at a rate of say 10 mm per 24 hour period, depending on the temp, the sealant should cure at the same rate inside the nozzle.

When ready for the next use, simply remove the nozzle clean or replace with a new nozzle and you should be ready to go.

Cheers
Glenn

__________________


Guru

Status: Offline
Posts: 1306
Date:

Farmhouse wrote:

I was a tech rep for a major sealant/adhesive manufacturer in Australia for several years.

My recommendation is to store all acetic or moisture cure sealant/adhesive in the fridge for a longer life and storage.

As all sealants/adhesives cure from exposure to the atmosphere by chemical fusion or drawing on ambient moisture for curing.

The sealant will only cure or harden from the end of the nozzle towards the cartridge or tube.

In theory, if the sealant cures at a rate of say 10 mm per 24 hour period, depending on the temp, the sealant should cure at the same rate inside the nozzle.

When ready for the next use, simply remove the nozzle clean or replace with a new nozzle and you should be ready to go.

Cheers
Glenn


 Any different in the freezer?



__________________

Ex software engineer, now chef



Veteran Member

Status: Offline
Posts: 49
Date:

No mate I would stick to the fridge, freezing is not required.

Even if you store in the fridge you may have to thaw a little before use, freezing would make that scenario worse.

Cheers
Glenn

__________________


Guru

Status: Offline
Posts: 4706
Date:

Farmhouse wrote:

No mate I would stick to the fridge, freezing is not required.

Even if you store in the fridge you may have to thaw a little before use, freezing would make that scenario worse.


Thank you Glenn.

It is so helpful to, from time-to-time, meet someone on the internet who actually knows what he is talking about.

The fridge it is :)



__________________

 

"I beseech you in the bowels of Christ think it possible you may be mistaken"

Oliver Cromwell, 3rd August 1650 - in a letter to the General Assembly of the Kirk of Scotland



Guru

Status: Offline
Posts: 7314
Date:

Just a thought. Maybe run a bit of PTFE plumbing tape around the threads etc to make an even better seal.



__________________

Procrastination, mankind's greatest labour saving device!

50L custom fuel rack 6x20W 100/20mppt 4x26Ah gel 28L super insulated fridge TPMS 3 ARB compressors heatsink fan cooled 4L tank aftercooler Air/water OCD cleaning 4 stage car acoustic insulation.



Guru

Status: Offline
Posts: 7640
Date:

I find it lasts longer in fridge . But Ive found or come to the conclusion I may need to buy another tube next time !

__________________
Whats out there


Veteran Member

Status: Offline
Posts: 49
Date:

Thanks Mike, I really enjoyed my life as a rep for Sika Australia and a couple of others.

Helping others with sealant and adhesive job problems is what I do.

 

I get great joy when I can help.

 

I am no longer in that business, very much retired now, the knowledge I gained however never leaves my mind.

 

Thanks for the kind words.

 

Glenn



__________________


Guru

Status: Offline
Posts: 4706
Date:

Farmhouse wrote:

I get great joy when I can help.


You and me both Glenn :)

I'm an electronics engineer (now retired) and have spent a lifetime building a store of knowledge which will be totally lost when I die which seems such a waste - a pity we cannot do a USB download of our brains :) otoh perhaps by striving to acquire knowledge the younger engineers will find avenues of discovery which eluded me and may be missed if they could simply do an upload from me?

The tradesmen of bygone times passed their knowledge to an apprentice but, as best I can see, there are few trades today which require the high skill levels of those of yesteryear.



__________________

 

"I beseech you in the bowels of Christ think it possible you may be mistaken"

Oliver Cromwell, 3rd August 1650 - in a letter to the General Assembly of the Kirk of Scotland



Senior Member

Status: Offline
Posts: 148
Date:

I think that the brand of material also matters.
The stuff from Bunnings goes off really quickly whilst the Soudal stuff I get at a local hardware place lasts for ages in the shed. That's my experience FWIW.

__________________


Guru

Status: Offline
Posts: 1306
Date:

Moose2 wrote:

I think that the brand of material also matters.
The stuff from Bunnings goes off really quickly whilst the Soudal stuff I get at a local hardware place lasts for ages in the shed. That's my experience FWIW.


 X2, as per my earlier comment. 



__________________

Ex software engineer, now chef



Veteran Member

Status: Offline
Posts: 97
Date:

Same deal with paint, don't bother washing everything between coats, just put roller and tray in a plastic bag and put it in the fridge, wash up after the second coat .

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook