check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Projecta PM335 question.
Post Info TOPIC: Projecta PM335 question.
iana


Guru

Status: Offline
Posts: 2923
Date:
Projecta PM335 question.
Permalink  

Considering the purchase of a Jayco Journey Outback. Reading the specs on the Projecta PM335 battery controller, it says that the Lithium Battery Charge cutout is set to 30% of the battery capacity. I read that as saying that the battery is only charged to 75% of its capacity. Anyone know anything on that?



__________________
kgarnett


Senior Member

Status: Offline
Posts: 169
Date:
Permalink  

For Lithium batteries the charge current is set to 30% of the battery capacity (0.3C)

This means that for example if your battery capacity is 120Ah then a charge current of 1C is 120A and a charge current of 0.3C = 0.3 x 120 = 36A.

The battery will be charged to its full capacity but the bulk charge current is limited to 36A.

Ken


__________________
iana


Guru

Status: Offline
Posts: 2923
Date:
Permalink  

Thank you for that.

__________________
Kellaig


Member

Status: Offline
Posts: 7
Date:
Permalink  

Hi Ian a
I have the 335. It will charge on solar, and 240 v to a maximum of 30a. This is its maximum.

__________________
kgarnett


Senior Member

Status: Offline
Posts: 169
Date:
Permalink  

Yes, If the max output of the 335 is 30A, then if 0.3C of the battery bank is greater than 30A (eg 36A), the 335 will only be able to charge at its maximum rated output of 30A.

__________________
RBK


Newbie

Status: Offline
Posts: 4
Date:
Permalink  

How do l change the profile of the Projecta PM335j to lithium...

__________________
TimTim


Guru

Status: Offline
Posts: 556
Date:
Permalink  

RBK wrote:

How do l change the profile of the Projecta PM335j to lithium...

  This is a link to your manual.

https://www.projecta.com.au/ts1655953495/attachments/ProductAttachmentGroup/1/PM300-BTJ%20&%20PM335J-NODE%20Instruction%20Manual-02.pdf

Section 6. Page 18 states that battery type and capacity can be set through the monitor or through the bluetooth app.  It then goes on to detail how you do it.

Tim



-- Edited by TimTim on Wednesday 16th of October 2024 08:17:00 PM

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Projecta PM335 question.
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook