check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Tyre pressure Sprinter LWB motor home


Newbie

Status: Offline
Posts: 1
Date:
Tyre pressure Sprinter LWB motor home


Recently purchased a 2011 Sprinter LWB motor home. What is the ideal tyre pressure? Have looked online but recommendations from 44psi up to 60psi. Any assistance will be appreciated.

__________________


Senior Member

Status: Offline
Posts: 313
Date:

You need to provide some specific information.
1. ACTUAL weight (from a weigh bridge) for each axle.
2. Tyre specifications, in particular the maximum load carrying capacity and the pressure required at that load. This information is moulded into the sidewall of the tyres.
Without this information, no one will be able to even guess.
Cheers,
Peter

__________________

OKA196 DIY, self contained 4WD MH, 1160W PV, 326Ah of CALB LiFePO4 batteries, 1.3kW inv, 310L water, 350-450L diesel.



Guru

Status: Offline
Posts: 1044
Date:

The Tyre pressires on the Plastic Plate that provides under passenger seat access on our 313 Long Wheel Base High Roof 3.55t Campervan reads:
................... Load....................................... Unload
225/70 R15 C Front 41psi and Rear 65 psi, Manual

The information you need should be somewhere on the vehicle eg drivers side door, bottom flip out comparment that has our axle ratings.

Your vehicle with, say 16/17 wheels and a different model could well have different pressures.

__________________


Senior Member

Status: Offline
Posts: 313
Date:

Tyre placards can not provide accurate information, because they do not know the actual weights carried which is critical information.
Getting it right is not difficult, but it is crucial to getting the best performance, safety and life from the tyres.
This applies to every vehicle.
Cheers,
Peter

__________________

OKA196 DIY, self contained 4WD MH, 1160W PV, 326Ah of CALB LiFePO4 batteries, 1.3kW inv, 310L water, 350-450L diesel.



Senior Member

Status: Offline
Posts: 459
Date:

Sprinter LWB fully loaded. 50psi Front 60psi Rear.
We ran our fleet at 60psi F+R.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook