Just make sure it has heeps of cross sectional material. My Bosch 12v angle grinder with a new 76mm disc will cut through 60 x 3mm galvanised pipe (5.3 sq cm) in 2 minutes on the first cut. 4min second cut, 7min third cut, because its motor is heating up.
__________________
Procrastination, mankind's greatest labour saving device!
50L custom fuel rack 6x20W 100/20mppt 4x26Ah gel 28L super insulated fridge TPMS 3 ARB compressors heatsink fan cooled 4L tank aftercooler Air/water OCD cleaning 4 stage car acoustic insulation.
Noel,
Most wheel clamps are Visual Deterrent only - it depends on who want to borrow your equipment & how prepared they are. Obviously the stronger the clamp, the more effort they have to put in to break/cut the clamp(s).
The best type in my way of thinking would be to have a touch sensitive explosive device fitted - then you'll find out who was after your gear!
__________________
Warren
----------------
If you don't get it done today, there's always tomorrow!
