check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Jayco Flamingo


Guru

Status: Offline
Posts: 632
Date:
Jayco Flamingo


Greetings. First post.
I have recently upgraded from an old Jayco Dove to a brand spanking new Flamingo.
On the old van I used substantial weight distribution bars (only because the bloke I bought it off said I needed to). They were a PITA to put on/take off, and I was never happy with that much steel under such tension close to my legs.
Are there any Flamingo owners out there who would care to comment on the need (or otherwise) to use bars on the new van?

Cheers, TonyD


__________________

If you don't stand behind our troops, please feel free to stand in front of them.



Guru

Status: Offline
Posts: 2333
Date:

Welcome to the forum, good first question. Ok so tell us more about the Flamingo, what are you towing it with and what does it weigh? Generaly these should not need stabilisers, weight distribution hitches or the like as the GVM is around 1500 kg which would put the ball weight ideally at around 150kg which should well be within the capacity of most tow vehicles.
Simple to check really, hitch it up on level ground and note the distance to the ground from somewhere on the towbar to the ground before hitching and after hitching. If after hitching there is a drop of more than 50mm then you may need weight distributors.
If your rated ball load is not as much as your actual ball weight then weight distribution hitches will not make it "legal" eg if the ball weight for your towbar is say 80kg you can only legally put 80kg weight on it. Those figures should be on the plate on your towbar. But say it is 250kg and you only want to put 80kg on it you should not need anything extra....

-- Edited by Basil Faulty at 21:17, 2008-09-14

__________________
Don't take life too seriously.... No one gets out alive

KIA Sorento CRDi EX  ( Ebony black) with 5 hex chrome plated tire air valve covers, Coramal Sunsheild, Elcheapo GPS, First Aid Kit, full KIA toolkit & Yellow lenses on the Foglights......


Guru

Status: Offline
Posts: 2601
Date:

well g'day there tonyd and welcome to you, being a lightweight, I wouldnt have thought you would need distribution bars, like basil states, try the static test, if she droops wack em on if she dont, leave em off. watch how you load the van also, keep the weight to the centre as much as possible

__________________
 me, the dragon, & little blue,  never stop playing, live long,  laugh lots, travel far, give a stranger a smile, might just be your next best freind.  try to commit a random act of kindness everyday

 http://daventhedragon.blogspot.com



Guru

Status: Offline
Posts: 4682
Date:

G'day Tony,

The previous advice is sound.  Be sure that your van & vehicle are loaded as you would for a trip.  Some people take measurements before & after hitching at the centre of the wheel arches of the vehicle both front & rear.

My Hayman Reese manual says that the first measurements should be made at the front & rear of the van to ensure that it is set up level and that the drop at the tow ball when hitched aught be no more than 15mm.  Of course this is part of a complicated process that ensures that the tow ball is at the correct height (adjustable on the Hayman Reece) and the springs are pulled up sufficiently. 

Of course Hayman Reece is the 'Rolls Royce' of hitches (& priced as such) & may an overkill for a lightweight set up.  '2 or 4 bar' set ups or the new Coast to Coast hitch may be suitable.
What sort do you currently have?

I would not be concerned in the least about bars under tension.  The only issue that I have heard of in this regard is from bad technique when releasing the spring bars.  Just make sure that your feet are out of harms way as you release the tension & that you use correct Kinetic 'lifting' methods .. (eg. chin in back straight - use your leg, not back muscles).

If at all in doubt USE A WEIGHT DISTRIBUTION HITCH (correctly set up as per manufactures specs).

cheers .. G



__________________

See Ya ... Cupie


Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook