check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Barrington Coast Airshow
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Connecting 12v/240v inverter to caravan 240v circuit


Senior Member

Status: Offline
Posts: 260
Date:
Connecting 12v/240v inverter to caravan 240v circuit


I know it's dangerous and most likely highly illegal ....... But........ I have a 1000 watt inverter hooked up to my batteries under   the bed and need a simple way of connecting the inverter output to the van 240 volt circuit so that I could use any power point  in the van to run any appliances to 1000 watt without having to run extra extension cords.

So my thought was to simply unplug the the supply lead to the hot water service out of the power point it's currently plugged into, as it would be switched to run on LPG, and just make up a short bit of cable and fit a plug to each end. One end into the power point the other into the inverter switch both on and the job should be done.

The running of a power cord from the inverter under the bed to the external plug does not appeal as it requires a few holes in all the wrong places, and fitting an additional plug similar to the external one under the bed does not appeal very much either because it means cutting into the existing plug and play Jayco system as well as having that plug live when the van is plugged into a van park power system.

Any ideas how to do it a better way?



__________________

I had a thought but it got run over as it crossed my mind.



Senior Member

Status: Offline
Posts: 183
Date:

safest way is just plug a cord into the inverter or move the inverter to more suitable location.


__________________


Guru

Status: Offline
Posts: 4725
Date:

greyhoundtom wrote:
 and just make up a short bit of cable and fit a plug to each end.

 I would suggest that you get that thought out of your head. It does not matter how careful at securing that lead in a safe place you never know who will chance upon it. If it is a kid they will probably end up electroplating themselves. Constructing one of those leads is perhaps one of the most dangerous things you can do.



__________________

PeterD
Nissan Navara D23 diesel auto, Spaceland pop-top
Retired radio and electronics technician.
NSW Central Coast.

 



Guru

Status: Offline
Posts: 1946
Date:

PeterD wrote:
greyhoundtom wrote:
 and just make up a short bit of cable and fit a plug to each end.

 I would suggest that you get that thought out of your head. It does not matter how careful at securing that lead in a safe place you never know who will chance upon it. If it is a kid they will probably end up electroplating themselves. Constructing one of those leads is perhaps one of the most dangerous things you can do.


 NO NO NOcry

DO not do that.

Do search other threads for the use of inverters in caravans. There has been plenty of discussion.

Jaahn



-- Edited by Jaahn on Wednesday 16th of December 2015 09:05:05 AM

__________________


Guru

Status: Offline
Posts: 4375
Date:

It can be done with a hard wired inverter, but it needs an automatic 240V changeover switch and must be installed by a licenced electrician.
Any other method is potentially deadly and certainly illegal.
The power from a 100W inverter will be enough to kill you.

Cheers,
Peter

__________________

OKA196, 4x4 'C' Class, DIY, self contained motorhome. 960W of solar, 400Ah of AGMs, 310L water, 280L fuel. https://www.oka4wd.com/forum/members-vehicles-public/569-oka196-xt-motorhome
 

 



Guru

Status: Offline
Posts: 2206
Date:

The way I read the OP is that he is asking to have an extension cord with 2 yes 2 male plugs.

One into inverter and one into existing van circuit at the hot water power GPO.

TOM THIS IS A NO NO.

Very dangerous if someone has a play without knowing what has been done.



__________________

Why is it so? Professor Julius Sumner Miller, a profound influence on my life, who explained science to us on TV in the 60's.



Guru

Status: Offline
Posts: 1344
Date:

Make this another vote for the No, No, Nooo's apart from the lead being very dangerous you could also make the power in socket on the outside of the van live.
Landy

__________________
In life it is important to know when to stop arguing with people and simply let them be wrong.


Guru

Status: Offline
Posts: 7640
Date:

Two opposing AC can be 415 volts ... See how things get out of control...
It is a NO NO having 2 supplies at once.. As said unless there a controller ..
Wired by electrician in this field..

__________________
Whats out there


Guru

Status: Offline
Posts: 4725
Date:

Aus-Kiwi wrote:

Two opposing AC can be 415 volts ... See how things get out of control...


 Two 240 V supplies have to be 120 degrees out of phase to produce 415 V. You will not be able to achieve that in a van.



__________________

PeterD
Nissan Navara D23 diesel auto, Spaceland pop-top
Retired radio and electronics technician.
NSW Central Coast.

 



Senior Member

Status: Offline
Posts: 260
Date:

OK no it is .......... I'm just going to have to move the inverter to a location that allows those items it's intended for to plug in directly.

A well a bit more 12 volt wiring to run.

Thanks guys, I do need a swift kick up the tail every now and against.

__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Offline
Posts: 4725
Date:

Tom, rather than run longer 12 V cables, use an extension lead from the inverter to your appliances. You will get far less power loss that way.

__________________

PeterD
Nissan Navara D23 diesel auto, Spaceland pop-top
Retired radio and electronics technician.
NSW Central Coast.

 



Guru

Status: Offline
Posts: 1252
Date:

Jaahn wrote:
PeterD wrote:
greyhoundtom wrote:
 and just make up a short bit of cable and fit a plug to each end.

 I would suggest that you get that thought out of your head. It does not matter how careful at securing that lead in a safe place you never know who will chance upon it. If it is a kid they will probably end up electroplating themselves. Constructing one of those leads is perhaps one of the most dangerous things you can do.


 NO NO NOcry

DO not do that.

Do search other threads for the use of inverters in caravans. There has been plenty of discussion.

Jaahn



-- Edited by Jaahn on Wednesday 16th of December 2015 09:05:05 AM


 NO NO NO.. I agree with all the above. When I was training electricians, we called these suicide leads and they were locked away and only used under our close supervision. Just dont do it please.



__________________

Ex RAAF, now retired. EX Electrician/Teacher.

Homebase is Murray Bridge Tourist Park (in a cabin). New Horse.. 2020 Ford Everest Titanium, Jayco swan for touring.

Life is way too short to be grumpy.



Veteran Member

Status: Offline
Posts: 97
Date:

why don't you just use an extension lead from inverter output to caravan 240 volt input plug - replace van RCD with an RVD ?



__________________
HAPPINESS is a journey, not a destination. So work like you don't need the money, Sing like no-one is listening, Love like you've never been hurt & Dance like no one's watching


Senior Member

Status: Offline
Posts: 260
Date:

lizard wrote:

why don't you just use an extension lead from inverter output to caravan 240 volt input plug - replace van RCD with an RVD ?


 Thanks Lizard that is the most logical idea yet, and with a little bit of work I can achieve that.



__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Offline
Posts: 4375
Date:

greyhoundtom wrote:
lizard wrote:

why don't you just use an extension lead from inverter output to caravan 240 volt input plug - replace van RCD with an RVD ?


 Thanks Lizard that is the most logical idea yet, and with a little bit of work I can achieve that.


Maybe a problem there in that the inverter will have a 10A outlet socket and the van will (probably) have a 15A inlet.

There are 2 options for that.

Use an Ampfibian (sp?) to convert or change the 15A van inlet to a 10A inlet (plus RVD).

The latter will require a licensed sparky.

 

Cheers,

Peter



__________________

OKA196, 4x4 'C' Class, DIY, self contained motorhome. 960W of solar, 400Ah of AGMs, 310L water, 280L fuel. https://www.oka4wd.com/forum/members-vehicles-public/569-oka196-xt-motorhome
 

 



Senior Member

Status: Offline
Posts: 118
Date:

greyhoundtom wrote:

 and just make up a short bit of cable and fit a plug to each end. One end into the power point the other into the inverter switch both on and the job should be done.

 


 Hello Mr Greyhoundtom, If I have got this right you will be making up a small lead with a three pin male plug on each end. That is what Ive always believe to be called a DEAD MANS PLUG. Not legal at all. Hope I'm wrong with that.



__________________

Made Beer Bottles for 44 years..... Now.... just test them.

 



Senior Member

Status: Offline
Posts: 260
Date:

Thanks everyone for their input, and legal or not I have solved the situation to my satisfaction by doing a bit more electrical work that most likely should have been done by a licensed electrician.

Because the inverter and battery connection for it are under the lift up bed I have fitted a standard 240 volt power outlet to the side of the bed, wired a short section of lead into the back of it with a plug on the end, and that is plugged into the inverter.

This allows me to plug an extension cord into that power point and that way run the small appliances I wanted to run with minimal problems as they are all located within two metres of that point.

And yes the back of the power point has got a cover over it making it impossible to touch any live wires or connections.

__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Offline
Posts: 1743
Date:

greyhoundtom wrote:

Thanks everyone for their input, and legal or not I have solved the situation to my satisfaction by doing a bit more electrical work that most likely should have been done by a licensed electrician.

Because the inverter and battery connection for it are under the lift up bed I have fitted a standard 240 volt power outlet to the side of the bed, wired a short section of lead into the back of it with a plug on the end, and that is plugged into the inverter.

This allows me to plug an extension cord into that power point and that way run the small appliances I wanted to run with minimal problems as they are all located within two metres of that point.

And yes the back of the power point has got a cover over it making it impossible to touch any live wires or connections.


 

Hi

"TO YOUR SATISFACTION"???????????nono

LIKE IT OR NOT , YOU have no idea why what you have done is completely illegal

  Has the potential to kill

You could be in deep, deep , trouble should someone receive a shock. OR MUCH WORSE DEAD

You still have carried out work that only a licensed electrician SHALL DO

You have no idea of how potentially dangerous any of your ideas have been

What you have done is completely not approved,& could under certain conditions end up with some one DEAD [ potentially extremely dangerous .}

You do not have even basic understanding of the electrical standards /rules/ ,regulations.

Rip it OUT NOW & get someone who knows the rules/regulations & is qualified/licensed to do such work before you or some else ends up in serious trouble or DEADnocry

And I hope NO ONE is stupid enough to tell you how it should be done!!!

PeterQ

 



-



-- Edited by oldtrack123 on Thursday 24th of December 2015 12:25:58 AM

__________________


Guru

Status: Offline
Posts: 1743
Date:

grahamg wrote:

safest way is just plug a cord into the inverter or move the inverter to more suitable location.


 

Hi

The only way such "portable} inverters should be used

with the ADDITIONAL SAFETY RECOMMENDATION


NEVER CONNECT MORE THAN ONE CLASS1 DEVICE [always have 3 pin plugs] at any time 

OR ,be PERMANENTLY WIRED IN IN FULL ACCORDANCE WITH THE RELEVANT ELECTRICAL STANDARD & SWITCHING REQUIREMENTS

This poster's ideas  has really frightened the  xxxxxx out of me.
Please Tom leave electrical work alone before some one ends up dead

 



__________________


Senior Member

Status: Offline
Posts: 260
Date:

All I have done is transferred the power supplied by fixed outlet from the 12/240 volt inverter that is located under the bed to a separate power point that is located at the side of the bed so that the voltage supplied by the inverter is more easily available, and as an added bonus now has an additional double pole off switch.

At no point is any of that connected to the 240 volt wiring of the van, nor was anything done to affect the inverter itself other than plugging a lead and plug into its outlet.

Yes to my satisfaction, because I know it to be perfectly safe........ and don't tell me how wonderful and safe licensed electricians are ....... I have spent 40 years in the building trade and have seen plenty of them work.

__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Offline
Posts: 1743
Date:

confusegreyhoundtom wrote:

All I have done is transferred the power supplied by fixed outlet from the 12/240 volt inverter that is located under the bed to a separate power point that is located at the side of the bed so that the voltage supplied by the inverter is more easily available, and as an added bonus now has an additional double pole off switch.

At no point is any of that connected to the 240 volt wiring of the van, nor was anything done to affect the inverter itself other than plugging a lead and plug into its outlet.

Yes to my satisfaction, because I know it to be perfectly safe........ and don't tell me how wonderful and safe licensed electricians are ....... I have spent 40 years in the building trade and have seen plenty of them work.


 

Hi Tom

Perhaps you should have your original post fully corrected, because it is misleading & potentially dangerous

Here  is what you posted

Because the inverter and battery connection for it are under the lift up bed  I HAVE FITTED A STANDARD 240V OUTLET to the side of the bed, wired a short section of lead into the back of it with a plug on the end, and that is plugged into the inverter

You have NOW added the crucial detail

"as an added bonus now has an additional double pole off switch."

 AND It is NOT a STANDARD outlet.!!!!!!

IT IS FAR FROM A BONUS 

IT IS AN ESSENTIAL REQUIREMENT

 

I suggest that if you wish to post on low voltage electrics & give "advice", that you are very clear in what you post 

For the sake of others who may read & follow your "advice"???

 

PeterQ



-- Edited by oldtrack123 on Friday 25th of December 2015 01:23:16 AM

__________________


Guru

Status: Offline
Posts: 1743
Date:

greyhoundtom wrote:
lizard wrote:

why don't you just use an extension lead from inverter output to caravan 240 volt input plug - replace van RCD with an RVD ?


 Thanks Lizard that is the most logical idea yet, and with a little bit of work I can achieve that.


 

Hi Tom

I suppose you are going to be foolish enough to do this restricted  work as well.no

It   seems you have little idea of the rules & regulations & their purpose 

They are primarily there to protect fools & innocent parties

Your apparent contempt for rules& regulations  & lack of understanding of the risks of your ideas horrifies me

& I suggest you stick to YOUR trade!!!!

Yes, like carpenters & builders  there are good & bad,electricians, No hopers even some absolute idiots.

But the Rules /Regulations & Electrical Standards, IF followed , save lives.

Unfortunately many would bes,  THINK they know better..

Which group do you fit in???



-- Edited by oldtrack123 on Friday 25th of December 2015 01:19:45 AM

__________________


Senior Member

Status: Offline
Posts: 260
Date:

Mea culpa ..... Mea maxima culpa.

__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Offline
Posts: 7640
Date:

PeterD wrote:
Aus-Kiwi wrote:

Two opposing AC can be 415 volts ... See how things get out of control...


 Two 240 V supplies have to be 120 degrees out of phase to produce 415 V. You will not be able to achieve that in a van.


if pluged into mains it could easy..



__________________
Whats out there


Guru

Status: Offline
Posts: 1743
Date:

Hi
 



-- Edited by oldtrack123 on Monday 4th of January 2016 08:31:36 PM

__________________
KFT


Guru

Status: Offline
Posts: 2437
Date:

oldtrack123 wrote:

Hi
 



-- Edited by oldtrack123 on Monday 4th of January 2016 08:31:36 PM


 Hi to you too, Are you ok PeterQ?

 

Frank



__________________

Avagreatday.

Kathy and Frank currently at Home near Quirindi NSW



Guru

Status: Offline
Posts: 1743
Date:

KFT wrote:
oldtrack123 wrote:

Hi
 



-- Edited by oldtrack123 on Monday 4th of January 2016 08:31:36 PM


 Hi to you too, Are you ok PeterQ?

 

Frank


 

Hi Frank 

sent you a PM 

PeterQ



__________________


Newbie

Status: Offline
Posts: 1
Date:

There is a safe way to do this-http://www.enerdrive.com.au/new-epower-inverter-ac-transfer-safety-switch-protection

__________________
M French


Senior Member

Status: Offline
Posts: 161
Date:

This thread is a reminder why we're not allowed the opportunity to do any mains electrical work ourselves. It's a disappointing outcome for those of us who have taken time to educate themselves adequately to complete a particular task, yet are still not permitted. Where does this determination to complete dangerous work so far above an individual's knowledge base come from???

__________________


Guru

Status: Offline
Posts: 1743
Date:

Barboots wrote:

This thread is a reminder why we're not allowed the opportunity to do any mains electrical work ourselves. It's a disappointing outcome for those of us who have taken time to educate themselves adequately to complete a particular task, yet are still not permitted. Where does this determination to complete dangerous work so far above an individual's knowledge base come from???


 

It comes from EVERY Australian states' Electrical ACTs & REGULATIONS

Easy to find on the net for every state including penalties for non compliance



__________________
1 2  >  Last»  | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook