check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Under slung axels


Newbie

Status: Offline
Posts: 2
Date:
Under slung axels


I just bought a Majestic Sierra 2. 2015 model. I would like to underslung the axels and put a bit bigger tyres on for a bit more ground clearens. Currently it has 15inch rims on and I am thinking ither just a larger tyre (semi off-road) or 16 inch rims. Any advice please

__________________


Senior Member

Status: Offline
Posts: 245
Date:

Hi there, welcome to the forum.
I asked a similar question a few weeks ago in the techies section. Tou may find more information there.
There are a lot of things to consider when doing the lift.
Do a search in the techie section and best of luck.
Cheers.
Kezngaz.

__________________

Commitment shows. Quality is what is done when no one is looking.

2014 Lc200 with 17ft New Age Big Red in tow.



Member

Status: Offline
Posts: 24
Date:

Notwithstanding that you have titled the thread "Underslung axles", the terms over and under refers to the position of the springs relative to the axle, not the other way around. What you appear to be looking to do is to OVERsling (the springs).

You will need to be aware of this when reading up on or discussing this as it can get pretty confusing. And other posts will not always be clear or correct.



-- Edited by colinoldncranky on Sunday 23rd of July 2017 07:39:17 PM

__________________


Guru

Status: Offline
Posts: 3066
Date:

Before doing that.
If you do it ploperly, It'll be more stable.

Jack van up. On axle stands.
Drop suspension from chassis down.
Normally they just angle iron welded or bolted to chassis
with suspension welded to that.


Get another section of 2x2\3x2\4x2\6x2. Welded on both side rails.
then add existing susp back onto them.
They'll both lift you, and if you run them out to rear jacks, or front drawbar rail
will strengthen whole chassis.

Just a thort.

The whole rig rocking on a coupla U bolts. Sitting under the springs. Does nothing for me thank's.

__________________


Guru

Status: Offline
Posts: 2046
Date:

G'day Macka, that's an interesting concept except it adds weight which is one of my bug-bears.

I had thought of getting longer links (if that is possible) between the rear spring & the chassis mount - or changing the suspension to something else eg Timbren Axleless. I'll discuss it with a local trailer manufacturer here after next week's trip west.

Warren

__________________

Warren

----------------

If you don't get it done today, there's always tomorrow!

2019 Isuzu D-Max dual cab, canopy, Fulcrum suspension; 2011 17' Jayco Discovery poptop Outback



Guru

Status: Offline
Posts: 3066
Date:

Hi.
Sorry for long delay.

Above is what they do with Off and Semi Off roaders.

Extended links will do. Just be careful about sizing of plate and gussets.
They take a LOT of stress.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook