check out the new remote control Jockey Wheel SmartBar Solid GPS Caravan Tracking System Stay connected wherever you are with Zoleo Caframo Fans
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: JAYCO Conquest 2018 25.3 Table Shaft fix


Veteran Member

Status: Offline
Posts: 45
Date:
JAYCO Conquest 2018 25.3 Table Shaft fix


Hello all,

I have had this problem of the table shaft being loose and wobbly at the base, it has a tapered chrome steel shaft that fits into a alloy socket and it just wouldn't stay solid, so on with the thinking cap (2 years later) and I have fixed the problem.

I got a length of 8mm all-thread, nuts and washers from the 'big green shed', then I drilled a hole in the alloy socket and assembled as per the attached sketch, making sure I put the washer under the alloy socket so it wouldn't crack it, fortunately the shaft already had a washer welded in at the top and I made sure I didn't over tighten the nuts, this assembly tighten the shaft to the base and worked a treat.

Hope this helps anyone with my model of motorhome or might even suit the JAYCO Silverline.

 



Attachments
Jayco Table Shaft.pdf (1,558.3 kb)
__________________

Michael C

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook