Cheap alternative to removing complete door or infill to replace total unit when the middle pull out bit that covers centre hose inlet inevetiablly snaps off because its just a plastic hinge.
These can be snapped in as a quick repair (or leave until you sell van so you only have to replace total unit once). Would suit if you don't leave mains water plugged in or are happy to leave main door ajar.
Welcome to GN's Ted, With the Jayco inlet flap most just leave the gap in the flap when centre breaks off - it is unimportant in the scheme of things - barely noticeable.
__________________
Possum; AKA:- Ali El-Aziz Mohamed Gundawiathan
Sent from my imperial66 typewriter using carrier pigeon, message sticks and smoke signals.
I gave up trying to feed mains water into my van (the door was only part of the problem) - I replaced all of the key bits but the hose kept blowing off so I fed the system from an independent feed now on the A frame. I only open that door to feed water into the tanks.
Welcome to the forum - I hope you'll enjoy your time here, learn heaps & share heaps. The Search function can be very useful at times.
__________________
Warren
----------------
If you don't get it done today, there's always tomorrow!
I gave up trying to feed mains water into my van (the door was only part of the problem) - I replaced all of the key bits but the hose kept blowing off so I fed the system from an independent feed now on the A frame. I only open that door to feed water into the tanks.
