Greetings Nomads, our 2005 Jayco outback 52.58.OB model is blowing the 250 volt - 6 amp fuse behind the black cover for all the 12 volt blade fuses when 240 is connected resulting in the lights not working.
The power points and all the appliances have power when connected to mains power, the lights all work when switched to 12 volt. There must be circuit issue some where but we cannot find it.
Welcome Fourtysouth. From memory that old Jayco had 12/240 light combination. If this is so, I would suggest that is where 204v is shorting to 12v circuit. You will need a meter to check it out or - legally, an electrician (unless you are totally confident in your abilities).
__________________
Possum; AKA:- Ali El-Aziz Mohamed Gundawiathan
Sent from my imperial66 typewriter using carrier pigeon, message sticks and smoke signals.
Thank you for the feedback Possum, I have spent hours checking with a multimeter with no indication of a problem.
I had an electrician go through all the circuits, checked cords, lights with no outcome.
Bizarre
Thanks Chris, the numbers on the Setec are N2310 and immediately underneath that is 5136.
The serial Number is 08295.
The fuse is behind black front when unscrewed and partially removed.
Cheers
Tony
